How to make H323 call with H.460(18 and 19) enabled? Thanks!

Discussion related to implementation and use of the H.323 Plus H.323 stack at http://www.h323plus.org.
Post Reply
boxu
Posts: 1
Joined: Tue Jan 03, 2012 9:06 pm

How to make H323 call with H.460(18 and 19) enabled? Thanks!

Post by boxu »

Hello,

I am new to H323plus, I have some questions about H.460, Thanks in advance for your time!

I just did the following today:
- compiled ptlib-2.10.1-src
- compiled h323plus-v1_23_0
- running simpleplus in my two PCs, and make them call each other ( no gatekeeper) successfully

now I want to test and be familiar with H.460: could you tell me how I can setup a H.460 enabled call with H323plus? which kind of termial (simpleplus? or MyPhone2?) ) I need to use and how to setup the configaration?
do I need to start gnugk-2.3.5 for H.460? Thanks!

Regards,
Bo Xu

shorne
Posts: 45
Joined: Thu Aug 27, 2009 4:17 am

Re: How to make H323 call with H.460(18 and 19) enabled? Tha

Post by shorne »

You will need GnuGk v3. For baseline endpoint support for H.460.18/.19 you will need h323plus v1.23 For more advanced features like multiplexing use the CVS

Post Reply